N328 / N428
| Item | Unit | N328 | N428 | Remark |
|---|---|---|---|---|
| Max. turning dia. | mm | Ø32 | Ø42 | |
| Max. turning length (Rotary) | mm | 300 | ||
| Max. turning length (Fixed) | mm | 340 | ||
| Max. turning length (Non guide bush) | mm | 80 | 105 | |
| OD tooling holder | pcs | 6 | □16 | |
| ID tooling holder | pcs | 5 |
Ø25 | |
| Cross live tooling holder | pcs | 3 |
ER-20 | |
| Cross live tooling holder | pcs | 2 |
ER-16 | |
| Face live tooling of sub spindle holder | pcs | 8 |
8 | ER-16 |
| Sub spindle aside drilling tooling holder | pcs | 2 |
Ø25 | |
| No. of axis controls (with C axis) | pcs | 8 | 8 | |
| C axis control minimum | degree | 0.001° | ||
| Max. main spindle speed | rpm | 7000 | 6000 | |
| Max. sub spindle speed | rpm | 7000 | 6000 | |
| Rapid traverse of X1/X2/Z1/Z2/Y1 | M/min | 30 | ||
| Rapid traverse of Y2 | M/min | 20 | ||
| Main spindle motor | KW | 11 | ||
| Sub spindle motor | KW | 11 | ||
| Main spindle cooling | pcs | Oil cooling | ||
| Sub spindle cooling | pcs | Oil cooling | ||
| Main spindle clamping system | pcs | Hydraulic | ||
| Sub spindle clamping system | pcs | Hydraulic | ||
| Cross live tooling motor | KW | 1.6 / 6000rpm | ||
| Face live tooling motor of sub spindle | KW | 1.6 / 6000rpm | ||
| Lubrication tank | L | 2 | ||
| Air compressed pressure | Mpa | 0.6 | ※ 1 | |
| Air compressed flow | L/min. | 10 | ||
| Machine dimension L x W x H | mm | 2945 x 1665 x 2130 | ||
| Coolant tank | L | 380L(100%) | ※2 | |
| Weight | KG | 4450 | ※2 | |
※ 1. 0.6Mpa = 6kg/cm2 |
||||
Для зданий 
8 axis tooling system
